WorkinG With the SyStem
33
DEWE3-M4 • Technical reference • Printing version 1.0.1 • August 25, 2022
Changing channel settings
The next step is to change the channel settings:
1.
Click on the channel name in the list to enter a new name.
2.
Alternatively, the channel settings will also open by clicking on the gear button (see
There different settings are available
`
Sensor scaling (unit and scaling or sensitivity factor)
`
Table scaling for a non-linear scaling
All settings are automatically saved when entered and do not have to be saved separately.
Fig. 22: Changing channel settings
Design the measurement screen
After the channel settings are done, design the measurement screen to your needs:
1.
Double-click/tap on the menu tab or swipe the menu to the right.
2.
Click or tap on the
Instrument
menu tab and drag and drop a recorder on the measurement screen.
More instruments can be added and adjusted like this, when being in
Design Mode
(see 2 in
3.
Click on the
Data Channel
menu tab and add the signal by selecting the instrument and the signal to be shown or
by drag and dropping the signal into the instrument.
4.
Disable the
Design Mode
.
The design of the measurement screen is now finished.
