SyStem SetuP
16
No. Element
Description
9.
RS-232 interface con-
nector (COM 1)
1
2
3
4
5
6
7
8
9
The RS-232 interface connector (male) is configured as standard RS-232
interface COM 1 and can be used for mouse or other peripheral units.
Pin assignment:
1. DCD (Data Carrier Detector)
2. RD (Received Data)
3. TD (Transmitted Data)
4. DTR (Data Terminal Ready)
5. GND (Ground)
6. DSR (Data Set Ready)
7. RTS (Request To Send)
8. CTS (Clear To Send)
9. RI (Ring Indicator)
10.
Chassis terminal
For some kind of measurements, it is necessary to provide the system
with an additional ground connection.
11.
EPAD connector
(LEMO)
Lemo EGG.1B.304
1
2
4
3
To connect DEWETRON EPAD modules to the system. Shield is connected
on housing.
Pin assignment:
1. RS-485 A
2. RS-485 B
3. +12 V
4. GND
Mating connector
LEMO FGG.1B.304.CLAD52Z (for cable diameter 4.1 to 5.0 mm)
LEMO FGG.1B.304.CLAD62Z (for cable diameter 5.1 to 6.0 mm)
12.
TRION series module
slots
Slots for TRION series modules. For more information about the various modules
refer to chapter TRION™ series modules overview.
Option DW2-LAN-2
The DEWE2-Mx series systems are equipped with two additional 1 GBit LAN interfac
-
es connectors which replace the WLAN and AUDIO interfaces.
Tab. 2: Connections and ports DEWE2-M7s
TRION series modules overview
Analog modules
ANALOG modules
Channels Sample rate
per channel
Resolution
Isola-
tion
Connector
type
TRION-1820-MULTI
V
100
00
4
2 MS/s
24 bit
>2 MS/s: 18 bit
yes
D-SUB
TRION-2402-MULTI
V
100
4 or 8
200 kS/s
24 bit
yes
D-SUB,
LEMO 0B
TRION-1620-ACC
V
100
00
6
2 MS/s
24 bit
>1 MS/s: 16 bit
yes
LEMO 1B, BNC
Tab. 3:
TRION analog modules
