Dewetron DEWE-3010-IPC, Technical Reference Manual

Page: 11 / 19

DEWE-3010 IPC
1. P o w e r supply connector
1.1 A C power supply
Input:
Input range:
Input frequency:
Max. input current:
Output:
Output power:
Output voltages:
85 .. 135 VAC and 180 .. 265 VAC (auto selecting)
47 .. 440 Hz
5 A (115 VAC) or 3 A (230 VAC)
150 W
+5 V ( m a x . 25 A)
+12 V (max. 10 A)
-5 V ( m a x . 1 A)
-12 V ( m a x . 1 A)
The maximum load is 150 W, otherwise power supply
can be damaged.
The system fuse is located between connector and power switch. If the system doesn't work
after switching on, disconnect the power cord and check the fuse.
1.2 DC power supply
Input:
DC and battery input:
Max. input current:
Input power:
Input voltage priority:
Battery type:
Output:
Output power:
Output voltages:
Power LED:
dim green:
bright green:
orange:
red:
10 to 32 VDC
3.5 A (230 VAC), startup peak up to 25 A
160 W
1. D C voltage
2. Battery
NiCd, 24 VDC, 600 mAh
160 W
+5 V ( m a x . 20 A)
+12 V (max. 5 A)
-5 V ( m a x . 0.3 A)
-12 V ( m a x . 0.4 A)
The maximum load is 160 W, otherwise the power supply
can be damaged.
DC connected to system, system powered off
DC connected to system, system powered on
system powered on, working via accu
starts 30 sec. before accu is getting low together with beep signal
Printing version 1.3.6 / April 18, 2000
Page 9