Use GPS for Timing and Synchronization
How-to Guide
2.3 100 Hz internal GPS
Also for 100 Hz GPS select the Topcon/Javad device.
2.4 DS-GPS-SYNC
For the clocking of single slices or a DEWE-43, use the DS-GPS-SYNC kit available at DEWESoft, which
consists of an external GPS (with PPS out functionality), which you just need to connect; all the cabling is
already done.
Connect the Dsub9 to the CAN port, the GPS mouse will be powered from the (often not used) CAN port.
The 00 Lemo cable is connected to the Sync connector for the TTL PPS signal. The serial communication
to the GPS is done over USB by using an additional RS232-to USB converter (included in the set).
GPS module V21-1
5/15
