DS-VGPS-HS
TECHNICAL REFERENCE MANUAL
6.1. Installation of the DS-VGPS-HS
After installing DewesoftX® , connect the RS-232 connector to the corresponding COM port of your
system. Check on which COM port is DS-VGPS-HS connected in the Device manager.
6.2. Configuration of DewesoftX® for the DS-VGPS-HS
●
Start DewesoftX®
●
To unlock the GPS functionality in DewesoftX® the GPS has to be configured in the Hardware
Setup screen (Settings → Hardware Setup):
In the Settings window select 'GPS' and follow the instructions below:
Image 18: Settings
GPS device
A list of the supported GPS systems. Select the Dewesoft RS232 (Topcon/Javad/NVS) GPS device. If it
doesn't find the Model of receiver press the Refresh button or you have to switch COM port.
COM port
Select the corresponding COM port in the drop down menu. If the GPS can not be found select the port
where the GPS is connected from the COM port drop down menu and hit the 'Refresh' button.
Model
Shows the hardware version of the VGPS system.
V21-1
19/30