DEWE-43A
TECHNICAL REFERENCE MANUAL
Image 33: Help - Manual
6.3.2. Analog channel setup
In the analogue channel setup screen you can see all channels of your connected DEWE-43A systems.
Per default only the first channel will be set to Used. Unused channels will not show up in measure
mode and can thus not be used for display, calculations or storing: thus, we will also set the other
channels to the used. You can left-click on the Used column of channel 2 (1), hold the mouse button and
move the mouse down to channel 6 (2): then release the mouse button and all channels will be selected
– this is shown by the black rectangle around the buttons. Then you can click into the selected region to
toggle Used/Unused for all channels at once. The selected channels will also be highlighted in the small
preview image of the device (3).
When you press the Setup button of a channel (the column at the right edge of the channel table – not
shown in this screen-shot), you can change all the settings of the channel amplifier. You can also change
the sample rate of Krypton (4).
DEWE-43A V20-2
27/38
