Troubleshooting
RF-TOUCH
12
83423(-)
6. Troubleshooting
If you experience an error that is not listed in this table, please contact your supplier.
Problem
Possible cause
Solution
The hand-held remote or drive sys-
tem is not functioning.
There is no mains volt-
age on the drive or con-
trol unit.
Connect the mains power.
The hand-held remote
control or drive system
is defective.
Please contact your supplier
or sales agent.
The batteries are empty
Check the batteries and re-
place if necessary.
The batteries have been
improperly inserted.
Reinsert the batteries proper-
ly. Be sure to align the bat-
tery poles properly!
The drive is suddenly not capable
of movement.
The drive's fuse may
have been triggered or
may be broken.
Please contact your supplier
or sales agent.
There is no mains sup-
ply voltage.
Connect the mains power.
The RF-TOUCH will not function
immediately after the initial start-up
or battery replacement.
The touch surface is
touched
Lay the RF-TOUCH approx.
5 min to side and do not
touch it.
The batteries are chan-
ged
Lay the RF-TOUCH approx.
5 min to side and do not
touch it.
Summary of Contents for RF-TOUCH
