background image

Dewert User Manual 2000XL Series– Updated 05.2021/1 MDR                                                                Page 17 of 19 

10. Declaration of Conformity 

 

EU Declaration of Conformity for medical devices 

 

Manufacturer:

   

 

K.H. DEWERT GmbH 

 

 

 

 

Vollmestr. 7 

 

 

 

 

D-33649 Bielefeld 

 

The product:  

 

Height adjustable table  

           

  

Model designation:   
2000XLE, 2000XL/H, 2001XLE, 2001XL/H, 2006XLE, 2006XL/H, 2007XLE, 2007XL/H, 2008XLE,    
2008XL/H, 2009XLE, 2009XL/H, 2010XLE, 2010XL/H, 2011XLE, 2011XL/H, 2030XLE, 2030XL/H,  
2035XLE, 2035XL/H, 2600XLE, 2600XL/H, 2605XLE, 2605XL/H, 2610XLE, 2610XL/H, 2615XLE,  
2615XL/H, 2650XLE, 2650XL/H, 2651XLE, 2651XL/H, 2655XLE, 2655XL/H, 2656XLE, 2656XL/H, 
2100XLE, 2100XL/H, 2105XLE, 2105XL/H, 2110XLE, 2110XL/H, 2114XLE, 2114XL/H, 2115XLE,  
2115XL/H, 2150XLE, 2150XL/H, 2155XLE, 2155XL/H, 2052XLE, 2052XL/H, 2053XLE, 2053XL/H 
2550XLE, 2550XL/H, 2551XLE, 2551XL/H, 2118XLE, 2118XL/H, 2119XLE, 2119XL/H, 2120XLE,  
2120XL/H, 2121XLE, 2121XL/H, 2210XL/H, 2215XL/H, 2250XL/H, 2255XL/H, 2418XL/H, 2419XL/H,  
2420XL/H, 2421XL/H, 2448XL/H, 2449XL/H, 2450XL/H, 2451XL/H 

 
The numerical codes -00, -03, -04 appended to the individual model designation only indicate the colour of the frame 
(-00 = white frame, -03= white aluminium frame, -04= grey aluminium frame).

 

 

Basic UDI-DI:

   

 

 

      

4063907KHDewertLiegenP2 

SRN:   

 

  

 

      DE-MF-000005967 

 
Intended purpose: 

The table is used for the ideal positioning of patients for the purpose of curative and disease treatment, 
examination, massage and health therapy. 
Table operation and patient positioning on the table may only be performed by professionally trained persons 
who have been instructed in its use or who, through experience with other similar medical devices, have 
knowledge of its proper use, taking into account possible hazards. Equipped with the options of movability 
(not wheel-lifting/fixing mechanism), side guards and push handle, the intended purpose of the table is 
extended and also provides for the ideal positioning of patients for the purpose of transport to pre-treatment or 
post-treatment locations. Patient positioning during the recovery phase after a medical procedure is also 
permitted under supervision. Otherwise, the device must only be moved within the room for cleaning or 
patient access. This device has been developed exclusively for use indoors and in normal ambient conditions 
and can be used in the following areas: laboratories, medical practices, examination and treatment rooms, 
hospitals, clinics, physiotherapy practices, occupational therapy centres 

and doctors’ surgeries.  

This table is not classed as surgical furniture and must, therefore, not be used for surgical purposes. 

 
complies with the relevant provisions of Regulation (EU) 2017/745, Article 19, Annex IV (Class 1 
according to Annex VIII, Chapter III, No. 4.1 of 5 April 2017). 

 

We hereby declare conformity with the aforesaid directive.  
As the manufacturer, we bear sole responsibility for issuing this EU Declaration of Conformity. 
 
Mark:     

                                                               

 

Bielefeld/Germany, 26 May 2021

 

 
K.-H. DEWERT GmbH  

 

Management  

Summary of Contents for 2000XL Series




















Reviews: