LED-LICHTLEISTE
Installation
80902(a)
25.11.2015
13
5.2.4
Electrical connection
CAUTION
Electric shock
Electrical components should be connected or disconnected only when the power cord from the
power supply is unplugged.
Routing the electrical cables
When routing the cables, be sure that:
the cables cannot get jammed,
no mechanical load (such as pulling, pushing or bending) will be put on the cables, and
the cables cannot be damaged in any way.
Fasten all cables (especially the connecting cables) to the end product using sufficient kink preven-
tion methods. Be sure that the design of the end product prevents the connecting cables from com-
ing into contact with the floor during transport.
5.2.5
Connect to the drive or control unit
CAUTION
You should only connect and disconnect the cables when they are completely disconnected from
any live current!
1
Insert the adapter cable's plug into the corresponding socket on the power supply (HE-300,
OKIMAT 8, etc.).
Fig. 9:
Connection of the LED-LICHTLEISTE to the drive or control unit
A
LED-LICHTLEISTE
B
HE-300
C
OKIMAT 8
B
C
A
A
