DeWalt XR Li-Ion DCG412-XE, Instruction Manual

Page: 3 / 24

1
Definitions: Safety Guidelines
The definitions below describe the level of severity for each signal
word. Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury .
WARNING: Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury .
CAUTION: Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury .
NOTICE: indicates a practice not related to personal injury which, if
not avoided, may result in property damage.
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY D
E
WALT TOOL,
CALL US AT: 1800 444 224 (Aust) or 0800 339 258 (NZ).
Technical Data
DCG412-XE DCG422-XE
Voltage V 18 14.4
Power input W 405 350
No-load/rated speed rpm 7000 5000
Wheel diameter mm 125 125
Spindle diameter M14 M14
Weight kg 3.0* 3.0*
* weight includes side handle and guard
L
PA
(sound pressure) dB(A) 87 84
K
PA
(sound pressure uncertainty) dB(A) 5 3
L
WA
(sound power) dB(A) 98 95
K
WA
(sound power uncertainty) dB(A) 5 3
Vibration total values (triax vector sum) determined according to EN 60745:
Vibration emission value a
h
surface grinding
a
h.AG
= m/s² 6.0 4.7
Uncertainty K = m/s² 1.5 1.5
The vibration emission level given in this information sheet has been measured in
accordance with a standardised test given in EN 60745 and may be used to compare
one tool with another. It may be used for a preliminary assessment of exposure.
WARNING: The declared vibration emission level represents the main applications
of the tool. However if the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account
the times when the tool is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator from the effects of
vibration such as: maintain the tool and the accessories, keep the hands warm,
organisation of work patterns.
SAFETY INSTRUCTIONS FOR POWER TOOLS
When using power tools, always observe the safety regulations applicable in your
country to reduce the risk of fire, electric shock and personal injury. Read the following
safety instructions before attempting to operate this product. Keep these instructions in
a safe place.
WARNING: To reduce the risk of injury, read the instruction manual.