DeWalt XR LI-ION DCF825, Original Instructions Manual

Page: 30 / 160

ENGLISH
28
Charger DCB105
Mains voltage V
AC
230 V
Battery type Li-Ion
Approximate min 25 30 40
charging time (1.3 Ah) (1.5 Ah) (2.0 Ah)
of battery packs 55 70 90
(3.0 Ah) (4.0 Ah) (5.0 Ah)
Weight kg 0.49
Charger DCB107
Mains voltage V
AC
230 V
Battery type Li-Ion
Approximate min 60 70 90
charging time
(1.3 Ah) (1.5 Ah) (2.0 Ah)
of battery packs 140 185 240
(3.0 Ah) (4.0 Ah) (5.0 Ah)
Weight kg 0.29
Charger DCB112
Mains voltage V
AC
230 V
Battery type Li-Ion
Approximate min 40 45 60
charging time
(1.3 Ah) (1.5 Ah) (2.0 Ah)
of battery packs 90 120 150
(3.0 Ah) (4.0 Ah) (5.0 Ah)
Weight kg 0.36
Fuses
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 3 Amperes, in plugs
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury .
WARNING: Indicates a potentially
hazardous situation which, if not
avoided,
could result in death or
serious injury .
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided,
may result in minor or
moderate injury .
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage .
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
BRUSHLESS CORDLESS IMPACT DRIVERS
DCF825, DCF895
D
E
WALT declares that these products described
under Technical Data are in compliance with:
2006/42/EC, EN 60745-1, EN 60745-2-2.
These products also comply with Directive
2004/108/EC (until 19.04.2016), 2014/30/EU (from
20.04.2016) and 2011/65/EU. For more information,
please contact D
E
WALT at the following address or
refer to the back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
D
E
WALT.
Horst Grossmann
Vice President Engineering
D
E
WALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
21.08.14
WARNING: To reduce the risk of injury,
read the instruction manual.
General Power Tool Safety Warnings
WARNING! Read all safety warnings
and all instructions.
Failure to follow
the warnings and instructions may result
in electric shock, fire and/or serious
injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.