DeWalt XR Li-Ion DCF680-XE, Instruction Manual

Page: 10 / 16

8
FIG. 2
A
F
G
C
I
H
D
B
E
COMPONENTS (Fig. 2)
WARNING: Never modify the power tool or any part of it. Damage or personal
injury could result.
A. Motion control activation trigger
B. Lock-off switch
C. LED worklight
D. Release button
E. Battery fuel gauge
F. Battery release button
G. Battery pack
H. Chuck
I. Torque adjustment collar
INTENDED USE
This cordless screwdriver is designed for professional fastening applications.
DO NOT use under wet conditions or in presence of flammable liquids or gases.
This cordless screwdriver is a professional power tool. DO NOT let children come into
contact with the tool. Supervision is required when inexperienced operators use this
tool.
ADJUSTMENTS
WARNING: To reduce the risk of serious personal injury, turn the tool off and
disconnect the battery pack before making any adjustments or removing/installing
attachments or accessories. An accidental start-up can cause injury.
Two Position Screwdriver (Fig. 3)
To convert the tool to an angled screwdriver push on the release button (D) and rotate
the top portion of the tool as shown.
NOTICE: Do not use screwdriver as a pry bar
in either position.
CAUTION: To avoid screwdriver being
turned on accidentally, put the lock-off
switch (B) in the up, locked-off, position.
Torque Adjustment Collar (Fig. 3)
The torque adjustment collar (I) is marked
with numbers and a 'MAX' symbol. The
higher the number on the collar, the higher
the torque. To lock the clutch for fastening
operations, move to the 'MAX' position.
Failure to do this will allow the clutch to slip
while attempting to fasten.
Quick Release Chuck (Fig. 1)
NOTE: The chuck accepts 1/4" (6.4 mm) hex accessories only.
To install a bit, insert the bit into the chuck until the clip locks it in place.
To remove a bit, pull the chuck (H) forward. Remove the bit and release the chuck.
1 3 5 7
D
B
I
FIG. 3