ENGLISH
46
2. Insert the battery pack into the charger. The red (charging) light will
blink continuously indicating that the charging process has started.
3. The completion of charge will be indicated by the red light
remaining ON continuously. The pack is fully charged and may be
used at this time or left in the charger.
NOTE:
To ensure maximum performance and life of lithium-ion battery
packs, charge the battery pack fully before first use.
Charger Operation
Refer to the table below for the charge status of the battery pack.
Charge Indicators
Charging
Fully Charged
Hot/Cold Pack Delay*
*
The red light will continue to blink, but a yellow indicator light will be
illuminated during this operation. Once the battery pack has reached
an appropriate temperature, the yellow light will turn off and the
charger will resume the charging procedure.
The charger will not charge a faulty battery pack. The charger will
indicate faulty battery pack by refusing to light.
NOTE:
This could also mean a problem with a charger.
If the charger indicates a problem, take the charger and battery pack to
be tested at an authorised service centre.
HOT/COLD PACK DELAY
When the charger detects a battery pack that is too hot or too cold, it
automatically starts a Hot/Cold Pack Delay, suspending charging until
the battery pack has reached an appropriate temperature. The charger
then automatically switches to the pack charging mode. This feature
ensures maximum battery pack life.
A cold battery pack will charge at a slower rate than a warm battery
pack. The battery pack will charge at that slower rate throughout the
Summary of Contents for XR LI-ION DCB132
Page 1: ...DCB132 FINAL PRINT SIZE A6 105mm x 148mm ...
Page 3: ...1 Figure 1 A ...
Page 131: ......
