background image

10

English

Do not expose to water. 

Have defective cords replaced immediately.

Charge only between 4 ˚C and 40 ˚C.

Only for indoor use.

Discard the battery pack with due care for the 
environment.

Charge 

D

e

WALT

 battery packs only with designated 

D

e

WALT

 chargers. Charging battery packs other 

than the designated 

D

e

WALT

 batteries with a 

D

e

WALT

 charger may make them burst or lead to 

other dangerous situations.

Do not incinerate the battery pack.

USE (without transport cap). Example: Wh rating  
indicates 108 Wh (1 battery with 108 Wh). 

TRANSPORT (with built-in transport cap). Example: 
Wh rating indicates 3 x 36 Wh (3 batteries of 36 Wh).

Battery Type

The DCS388 operates on a 54 volt battery pack. 
This battery pack may be used:DCB546. Refer to 

Technical Data

 

for more information.

Package Contents

The package contains:
1  Cordless reciprocating saw
1  Li-Ion battery pack (T1 models)
2  Li-Ion battery packs (T2 models)
1 Charger
1  Instruction manual

•  Check for damage to the tool, parts or accessories which may 

have occurred during transport.

•  Take the time to thoroughly read and understand this manual 

prior to operation.

Markings on Tool

The following pictograms are shown on the tool:

Read instruction manual before use.

Wear ear protection.

Wear eye protection.

Date Code Position (Fig. A)

The date code 

 10 

, which also includes

 

the year of manufacture, 

is printed into the housing.
Example:

2016 XX XX

Year of Manufacture

Description (Fig. A)

 

WARNING: 

Never modify the power tool or any part of it. 

Damage or personal injury could result.

Trigger switch

Lock-off button

Blade clamp release lever

Shoe

Hand grip

Main handle

Battery pack

Battery release button

Worklight

Intended Use

Your DCS388 cordless reciprocating saws have been designed 
for professional sawing of wood, metal and tubes. The compact 
design permits cutting extremely close to the edge of difficult 
areas.

DO nOT 

use under wet conditions or in presence of flammable 

liquids or gases.
These reciprocating saws are professional power tools.

DO nOT

 let children come into contact with the tool. 

Supervision is required when inexperienced operators use this 
tool.
• 

Young children and the infirm.

 This appliance is not 

intended for use by young children or infirm persons 
without supervision.

•  This product is not intended for use by persons (including 

children) suffering from diminished physical, sensory or 
mental abilities; lack of experience, knowledge or skills 
unless they are supervised by a person responsible for their 
safety. Children should never be left alone with this product.

ASSEMBLY AND ADJUSTMENTS

 

WARNING: To reduce the risk of serious personal 
injury, turn tool off and disconnect battery pack 
before making any adjustments or removing/
installing attachments or accessories. 

An accidental 

start-up can cause injury.

 

WARNING: 

Use only 

D

e

WALT

 battery packs and chargers.

Inserting and Removing the Battery Pack 
from the Tool (Fig. C, D)

nOTE:

 Make sure your battery pack is fully charged.

Summary of Contents for XR LI-ION DC388T2














Reviews: