3
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY D
E
WALT TOOL,
CALL US AT:
1800 654 155
(Aust) or
09 526 2556
(NZ).
SAFETY INSTRUCTIONS FOR POWER TOOLS
When using power tools, always observe the safety regulations applicable in your
country to reduce the risk of fire, electric shock and personal injury. Read the following
safety instructions before attempting to operate this product. Keep these instructions in
a safe place.
Safety Instructions for Lasers
WARNING! Read and understand all instructions.
Failure to follow all
instructions listed below may result in electric shock, fire and/or serious
personal injury.
SAVE THESE INSTRUCTIONS
WARNING! Laser Radiation Exposure. Do not disassemble or modify the laser
level. There are no user serviceable parts inside. Serious eye injury could result.
WARNING: Hazardous Radiation.
Use of controls or adjustments or performance
of procedures other than those specified herein may result in hazardous radiation
exposure.
• Do not operate the laser in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust.
Power tools create sparks which may ignite
the dust or fumes.
• Use the laser only with the specifically designated batteries.
Use of any other
batteries may create a risk of fire.
• Store idle laser out of reach of children and other untrained persons.
Lasers
are dangerous in the hands of untrained users.
• Use only accessories that are recommended by the manufacturer for your
model.
Accessories that may be suitable for one laser, may create a risk of injury
when used on another laser.
• Tool service must be performed only by qualified repair personnel.
Service or
maintenance performed by unqualified personnel may result in injury. To locate
your nearest DeWALT service center call (AUS) 1800 654 155 or (NZ) 09 526
2556 or go to www.dewalt.com.au on the Internet.
• Do not use optical tools such as a telescope or transit to view the laser beam.
Serious eye injury could result.
• Do not place the laser in a position which may cause anyone to intentionally
or unintentionally stare into the laser beam.
Serious eye injury could result.
• Turn the laser off when it is not in use.
Leaving the laser on increases the risk
of staring into the laser beam.
• Do not disassemble the laser tool.
There are no user serviceable parts inside.
• Do not modify the laser in any way.
Modifying the tool may result in Hazardous
Laser Radiation Exposure.
• Do not operate the laser around children or allow children to operate the
laser.
Serious eye injury may result.
• Do not remove or deface warning labels.
Removing labels increases the risk of
exposure to radiation.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER:
Indicates an imminently hazardous situation
which, if not avoided,
will
result in
death or serious injury
.
WARNING:
Indicates a potentially hazardous situation
which, if not avoided,
could
result in
death or serious injury
.
CAUTION:
Indicates a potentially hazardous situation
which, if not avoided,
may
result in
minor or moderate
injury
.
CAUTION:
Used without the safety alert symbol indicates a
potentially hazardous situation which, if not avoided,
may
result in
property damage.