11
This warranty does not apply to
• Accessories
• Damage caused where repairs have been made or attempted by others.
• Damage due to misuse, neglect, wear and tear, alteration or modification.
This warranty gives you specific legal rights and you may have other rights under the
provisions of the Consumer Guarantee Act 1993 (New Zealand only), Trade Practices
Act 1974 and State Legislation (Australia only).
In addition to the warranty, D
E
WALT tools are covered by our:
FREE ONE YEAR SERVICE CONTRACT
D
E
WALT will also maintain the tool for free at any time during the first year of purchase.
This includes labour, parts and lubrication required to restore the product to sound
mechanical and/or electrical condition. Normal wear parts are not covered in this
service. Carbon brushes worn more then 50% will be replaced.
NOTE:
Three Year Warranty is not applicable to items deemed as consumables. Radial
arm saws are covered by a one (1) year warranty only. D
E
WALT Reserves the right to
review its warranty policy prior to launch of any new business development products.
30 DAY NO SATISFACTION GUARANTEE
If you are dissatisfied with any D
E
WALT power tool, laser or nailer, for any reason,
simply return it to the point of purchase with your sales receipt within 30 days for a
replacement unit or a full refund.
FREE WARNING LABEL REPLACEMENT:
If your warning labels become illegible or are
missing, call (AUS) 1800 654 155 or (NZ) 09 526 2556 for a free replacement.
Patents Pending.
THE LASER BEAMS WILL NOT STOP MOVING
The DW086-XE and DW087-XE are precision instruments. Therefore, if the laser is not
positioned on a stable (and motionless) surface, the laser will continue to try to find
level. If the beam will not stop moving, try placing the laser on a more stable surface.
Also, try to make sure that the surface is relatively flat, so that the laser is stable.
SPECIFICATIONS
Light Source
Semiconductor laser diode
Laser Wavelength
630 – 680nm Visible
Laser Power
<1mw (each beam) CLASS II LASER PRODUCT
Working Range
30m (±100')
Accuracy (Plumb)
±6 mm per 9 m (± 1/4" per 30')
Accuracy (Level)
±3 mm per 9 m (± 1/8" per 30')
Indicators
Flashing Indicator: battery low
Flashing Laser: tilt range exceeded
Power Source
3 AA (1.5V) size batteries (4.5V DC)
Operating Temperature
-10°C to 45°C (20°F to 115°F)
Storage Temperature
-20°C to 60°C (-5°F to 140°F )
Environmental
Water Resistant
Service and Repairs
NOTE:
Disassembling the laser level will void all warranties on the product.
To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment
should be performed by authorized service centers. Service or maintenance performed
by unqualified personnel may result in a risk of injury. To locate your nearest D
E
WALT
service center call (AUS) 1800 654 155 or (NZ) 09 526 2556 or go to www.dewalt.
com.au on the Internet.
Guarantee
Applicable to hand held Power Tools, Lasers and Nailers.
Three Year Limited Warranty
D
E
WALT will repair, without charge, any defects due to faulty materials or workmanship
for three years from the date of purchase. Please return the complete unit, transportation
prepaid, to any D
E
WALT Service Centre, or any authorised service station.
For warranty repair information, call (AUS) 1800 654 155 or (NZ) 09 526 2556.