If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter
.
Si tiene dudas o comentarios, contáctenos.
1-844-377-8451 • www
.dewalt.com
INSTRUCTION MANUAL
GUIDE D’UTILISA
TION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SER
VICIO Y PÓLIZA
DE GARANTÍA.
ADVER
TENCIA:
LÉASE ESTE INSTRUCTIVO ANTES
DE USAR EL PRODUCTO.
DXST10000PBK
2 Piece Pegboar
d Kit for DXST10000 Industrial Rack
Ensemble de 2 panneaux perfor
és pour étagèr
e industrielle DXST10000
Kit de panel perforado de 2 piezas para estantería industrial DXST10000
Copyright © 2018 D
E
WALT.
D
E
WALT
®
and the D
E
WALT Logo are trademarks of the D
E
WALT Industrial Tool Co., or an affiliate thereof
and are used under license. The yellow/black color scheme is a trademark for D
E
WALT power tools
& accessories.
JS PRODUCTS | 6445 MONTESSOURI STREET, LAS VEGAS, NV 89113
SAVE THESE INSTRUCTIONS
READ ALL INSTRUCTIONS
TECHNICAL SPECIFICATIONS
BEFORE YOU BEGIN:
Parts List
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY D
E
WALT TOOL,
CALL US TOLL FREE AT:
1-844-377-8451
WARNING! Read and understand all instructions.
This
manual contains important safety and operating instructions.
Please read this manual carefully before assembling this storage
rack and save it for reference.
Technical Specifications
Height
24" (60.9 cm)
Width
71" (180.3 cm)
No. Description
Qty.
1
Metal Pegboard
2
2
Side Mounting Bracket (Right)
6
3
Side Mounting Bracket (Left)
6
4
Rear Mounting Bracket (Right)
2
5
Rear Mounting Bracket (Left)
2
6
Locking Pin
12
• Read all instructions thoroughly.
• Remove all components from the box, and lay them on the floor in an orderly fashion.
• Wear eye protection.
• Be cautious of sharp edges.
• Keep this information for further reference.
(APR18) Part No. 41554 DXST10000PBK Copyright © 2018, D
E
WALT
2
4
6
3
5
1
NOTE:
DXST10000 Industrial Racks are sold separately.
WARNING:
Serious or fatal crushing injuries can occur from rack tipping over. To prevent
this, the assembled rack must always be secured to a wall, especially in earthquake-prone
environments, where surfaces are uneven, and where children and/or pets are present.
NOTE:
This same process can be used for mounting double side panels.
NOTE:
Pegboards can be mounted to the back or sides of the DXST10000 Industrial Racks for
multi-functional organization.
NOTE:
See images below for different pegboard mounting options.
Side Pegboard Panel Assembly (Fig. 1-3)
Pegboard Assembly Orientations
GENERAL SAFETY
• Keep work area clean and dry.
• Use correct/recommended tools for the job.
• Never leave tools unattended.
• Never force a part into place.
• Wear safety apparel.
• Wear safety glasses/goggles.
• Never crawl, sit, stand, or climb on a rack.
• Keep small parts away from children. Never leave a small child unattended
while assembling.
• Always use common sense – your personal safety is your responsibility.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each signal word. Please
read the manual and pay attention to these symbols.
Indicates a potentially hazardous situation which, if not avoided,
could
result in
death or serious injury.
WARNING:
Indicates a potentially hazardous situation which, if not avoided,
may
result in
minor or moderate injury.
CAUTION:
(Used without word) Indicates a safety related message.
Indicates a practice
not related to personal injury
which, if not avoided,
may
result in
property damage.
NOTICE:
*Double side panels
*Single side and back panels
*Double back panels option 1
*Double back panels option 2
