DeWalt DXH1000TS, Instruction Manual

Page: 5 / 36

English
5
Storage
When not in use, the heater must be disconnected from power source, dusted off and
the cord should be loosely wound around the handle.
For service :
Please call Toll-Free 855-805-5745 www.dewalt.com
Our office hours are 8:00 AM – 5:00 PM, EST, Monday through Friday.
Please include the model number, date of purchase, and description of problem in all
communication.
WARNING: USE ONLY MANUFACTURER’S REPLACEMENT
PARTS. USE OF ANY OTHER PARTS COULD CAUSE INJURY OR
DEATH. REPLACEMENT PARTS ARE ONLY AVAILABLE
DIRECT FROM THE FACTORY AND MUST BE INSTALLED BY A
QUALIFIED SERVICE AGENCY.
Troubleshooting
Unit does not work • Defective thermostat or wrong thermostat setting
• Open circuit breaker or fuse
• Thermal overload switch has been tripped
• Faulty Connection
• Damaged or defective plug or outlet
Unit runs continuously • Defective thermostat or wrong thermostat setting
• Heat losses higher than unit capacity (unit undersized)
Elements are on but motor does not rotate • Defective Motor
• Blocked fan blades
Enclosure is extremely hot • Defective thermal protection
• Blocked air vents
• Defective motor
Desired room temperature cannot be reached • One or more elements are defective
• Defective thermostat or wrong thermostat setting
• Voltage lower than that written on Rate tag
• Heat losses higher than unit capacity (unit undersized)
Overheating • Defective thermostat or wrong thermostat setting
• Defective Motor
Heater emits a humming sound • Defective motor
• Fan blade blocked
• Contact defective (10K only)