DeWalt DXGNR 6500, Instruction Manual

Page: 9 / 80

Owner’s Manual for Portable Generator 7
Assembly
Unpacking
•
Remove all packaging material.
•
Remove separate accessory kit box.
•
Remove generator from carton.
Accessories
Check contents against the list in Table -1. If any parts
are missing or damaged, or if any problems occur during
assembly, call the Generator Helpline at 1-888-431-6871.
Table -1. Contents
Install Accessory Kits
The generator requires some minor assembly before
use.
Tools Required
Obtain the following tools:
•
Two 10mm, 12mm and 13mm box wrenches
•
Two 8mm box wrenches (8000W models)
Install Wheel Kit (If Equipped)
The wheels are specially designed to enhance portability.
The wheels are not intended for over-
the-road use.
DXGNR6500
1.
Slide axle pin (N) through wheel, 1/2” flat washer (G), and
wheel bracket on frame.
2.
Insert cotter pin (F) and bend tabs to lock in place.
DXGNR8000
1.
Slide M6 bolt (M) through holes in frame rail. Install into axle
bracket (L).
2.
Slide axle (D) through axle bracket (L), wheel (A), and into
½” flat washer (G). Insert hair pin (F) through axle (D).
Item
6500 8000
Qty. Qty.
Generator 1 1
Owner’s Manual 1 1
Product Registration Card
(English, Spanish, and French)
3 3
Service and Emissions Warranty 1 1
Liter SAE 30 Oil 1 1
Battery Charger (electric start
models)
- 1
Wheel (A) 2 2
Frame Foot (B) 2 2
Handle Assembly (C) 1 1
Axle (D) - 1
Hardware Bag
Rubber Foot (E) 2 2
Cotter Pin (F) 2 2
1/2” Flat Washer (G) 2 2
M8 Carriage Bolt (H) 2 2
M8 Bolt (long) (J) 4 4
M8 Hex Flange Nut (K) 6 6
Axle Bracket (L) - 2
M6 Bolt (M) - 4
1/2” Axle Pin (N) 2 -
M6 Hex Flange Nut (P) 2 2
NOTICE:
003604
G
C
F
M
A
N
E
K
J
B
H
003605
K
A
C
D
L
F
G
E
B
H
M
J