English
7
aluminum foil, or any buildup of metallic particles
should be kept away from charger cavities. Always
unplug the charger from the power supply when there
is no battery pack in the cavity. Unplug the charger
before attempting to clean.
6. Do not freeze or immerse the charger in water or any
other liquid.
Storage Recommendations
1. The best storage place is one that is cool and dry, away
from direct sunlight and excess heat or cold.
2. For long storage, it is recommended to store a fully
charged battery pack in a cool dry place out of the
charger for optimal results.
nOTE:
Battery packs should not be stored completely
depleted of charge. The battery pack will need to be
recharged before use.
SAVE THESE INSTRUCTIONS FOR
FUTURE USE
Specifications
DWH161
Airfow
cfm
19
Weight (without battery)
3.64 lbs (1.65 kg)
Hose Length
39" (99 cm)
HEPA Filter
Yes
Filter Cleaning Mechanism
Yes
Static Water Lift
in
38
Vacuum Suction Pressure
mbar
95
Capacity
cm³
210
Anti-Static Hose
Yes
Voltage
V
20
Wireless Tool Control™
Yes
Height
9.53" (242 mm)
Length
7.99" (203 mm)
Width
3.74" (95 mm)
Wet/Dry
Dry only
Noise values and vibration values (triax vector sum) according to
EN60745-2-6:
L
pA
(emission sound pressure level)
dB(A)
66.3
L
WA
(sound power level)
dB(A)
82.5
K
wa
(uncertainty for the given
sound level)
dB(A)
1.5
Intended Use
Your dust extraction system DWH161 has been designed
for the extraction of dust in professional hammerdrilling in
masonry or concrete, and with solid drill bits mounted to
the power tool. DO NOT use with SDS PLUS or SDS MAX
hollow drill bits. This dust extractor is for household and
commercial use.
This dust extraction system will fit the
D
e
WALT
D25301D,
DWH200D, DNP615 and DNP616.
DO nOT
use under wet conditions or in presence of
flammable liquids or gases.
The dust extraction system is an attachment for use with
professional power tools.
DO nOT
let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn unit off and remove the battery pack
before making any adjustments or removing/
installing attachments or accessories.
An
accidental start-up can cause injury.
Attaching the Strap (Fig. A, D)
Your dust extraction system comes with a strap
10
that can
be connected to the strap hooks
11
in either manner as
shown in Fig. D.
Fig. D
10
10
11
11
Attaching the Crevice Tool or Utility Tool
(Fig. A)
• To attach the crevice tool
12
or the utility tool
13
to
the dust extractor hose
6
, insert the end of the dust
extractor hose into the open end of the accessory with a
twisting motion until tight.
nOTE:
The dust extraction hose is not compatible with
AirLock
®
connectors.
• To remove the crevice tool or the utility tool, hold the
dust extraction hose and accessory pull the accessory off
using a twisting motion.
Installing the Belt Hook (Fig. E)
WARNING:
To reduce the risk of serious personal
injury, turn unit off and
remove the battery pack
before making any adjustments or removing/
installing attachments or accessories.
An
accidental start-up can cause injury.
WARNING: To reduce the risk of serious personal
injury, ONLY use the tool’s belt hook to hang
the tool from a work belt. DO NOT
use the belt
hook for tethering or securing the tool to a person or
object during use.
DO NOT
suspend tool overhead or
suspend objects from the belt hook.
WARNING: To reduce the risk of serious personal
injury, ensure the screw holding the belt hook
is secure.
Summary of Contents for DWH161D1
Page 39: ......
