58
English
Large angle grinders are designed for heavy material removal in
extended use applications. The following grinders are described in
this manual:
DWE4557
7" (180 mm) Angle Grinder
8500 rpm
DWE4577
7" (180 mm) Angle Grinder
8500 rpm
DWE4597
7" (180 mm) Angle Grinder
8500 rpm
DWE4559
9" (230 mm) Angle Grinder
6500 rpm
DWE4579
9" (230 mm) Angle Grinder
6500 rpm
DWE4599
9" (230 mm) Angle Grinder
6500 rpm
FIG. 1
D
J
F
H
I
G
A
B
C
C
E
• The label on your tool may include the following symbols. The
symbols and their definitions are as follows:
V ............. volts A
.............amperes
Hz........... hertz W
...........watts
min ......... minutes
..........alternating current
....... direct current
no ...........no load speed
........... Class I Construction
n ............rated speed
...............
(grounded)
...........earthing terminal
............ Class II Construction
...........safety alert symbol
...............
(double insulated)
…/min ....revolutions or
IPM ........ impacts per minute
...............
reciprocation
SPM ...... strokes per minute
BPM .......beats per minute
sfpm ...... surface feet
..............
per minute
..............
per minute (sfpm)
SAVE THESE INSTRUCTIONS FOR
FUTURE USE
Motor
Be sure your power supply agrees with the nameplate marking.
Voltage decrease of more than 10% will cause loss of power and
overheating. D
E
WALT tools are factory tested; if this tool does not
operate, check power supply.
DESCRIPTION (Fig. 1, 9)
WARNING:
Never modify the power tool or any part of it. Damage
or personal injury could result.
