20
English
Always use NIOSH/OSHA approved respiratory protection appropriate
for the dust exposure. Direct particles away from face and body.
WARNING:
ALWAYS
USE SAFETY GLASSES. Everyday
eyeglasses are NOT safety glasses. Also use face or dust mask if
cutting operation is dusty. ALL USERS AND BYSTANDERS MUST
ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CSA Z94.3),
• ANSI S12.6 (S3.19) hearing protection,
• NIOSH/OSHA/MSHA respiratory protection.
• The label on your tool may include the following symbols. The
symbols and their definitions are as follows:
V ................... volts
A ......................amperes
Hz ................. hertz
W .....................watts
min ............... minutes
or AC ..........alternating
or DC ... direct current
current
................. Class I Construction
or AC/DC ...alternating
..................... (grounded)
........................
or direct
................. Class II Construction
current
(double insulated)
no ....................no load
…/min .......... revolutions per minute ....................... speed
BPM ............. beats per minute n
......................rated
speed
IPM ............... impacts per minute
.....................earthing
SPM ............. strokes per minute
terminal
sfpm ............. surface feet
.....................safety alert
.....................
per minute
symbol
DESCRIPTION (FIG. 1, 2)
WARNING:
Never modify the power tool or any part of it. Damage
or personal injury could result.
A. Nozzle
B. Blast port
C. Trigger switch
D. Variable speed knob
E. Lock-on button
F. Suction port
G. Dust bag
A
F
D
E
H
B
C
FIG. 1
G
F
A
B
FIG. 2
