ENGLISH
24
TOOL GRINDING AND HONING MACHINE
DW754
Congratulations!
You have chosen a D
E
WALT power tool. Years of
experience, thorough product development and
innovation make D
E
WALT one of the most reliable
partners for professional power tool users.
Technical Data
DW754
Voltage
V
230
(UK & Ireland only)
V
230/115
Type
2
Rated current
A
1.86
Motor power (input)
W
415
Motor power (output)
W
300
No-load speed
min
-1
2,750
Max. wheel diameter
mm
125
Max. wheel width
mm
25
Wheel bore
mm
20
Weight
kg
9.3
Vibration total values (triax vector sum) determined according to
EN 61029:
L
PA
(sound pressure)
dB(A)
85
K
PA
(sound pressure
uncertainty) dB(A)
3
L
WA
(
sound power)
dB(A)
98
K
WA
(sound power
uncertainty)
dB(A) 3
NOTE:
The figures are emission levels and are not
necessarily safe working levels. Whilst there is a
correlation between the emission and exposure
levels, this cannot be used reliably to determine
whether or not further precautions are required.
Factors that influence the actual level of exposure
of the workforce include the characteristics of the
workroom and the other sources of noise, etc.
i.e. the number of machines and other adjacent
processes. Also, the permissible exposure level
can vary from country to country. This information,
however, will enable the user of the machine to
make a better evaluation of the hazard and risk.
Fuses:
Europe
230 V tools
10 Amperes, mains
400 V tools
16 Amperes, per phase
Defi nitions: Safety Guidelines
The definitions below describe the level of the
severity for each signal word. Please read the
manual and pay attention to these symbols.
DANGER:
indicates an imminently
hazardous situation which, if not
avoided,
will
result in
death or serious
injury
.
WARNING:
indicates a potentially
hazardous situation which, if not
avoided,
could
result in
death or
serious injury
.
CAUTION:
indicates a potentially
hazardous situation which, if not
avoided,
may
result in
minor or
moderate injury
.
NOTICE:
Indicates a practice
not
related to personal injury
which, if
not avoided,
may
result in
property
damage
.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
DW754
D
E
WALT declares that these products, described
under "technical data" are in compliance with:
2006/42/EC, EN 61029-1, EN 61029-2-4.
These products also comply with Directive
2004/108/EC. For more information, please contact
D
E
WALT at the address or refer to the back of the
manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
D
E
WALT
Summary of Contents for DW754
