background image

6

ACCESSORIES

Recommended accessories for use with your tool are available at extra cost from 

your 

d

istributor or local service centre.

Four accessories are available for the DW734 Thickness planer.

  •  DW7331 Dust Hood for DW734 (Also fits the DW733)

  •  DW7342  318 mm (12-1/2”) Reversable Planer Knives

CAUTION:

 The use of any other accessory not recommended for use with

this tool could be hazardous.

D

E

WALT AFTER SALES SERVICE

All  power tools are thoroughly tested before leaving the factory. However, if the 

power tool needs repair, please contact your dealer or take it to your nearest D

E

WALT 

Service Centre. There is a Service Centre in every capital city. For service, repair or 

parts call 1800 654 155.

ACCESSORIES

Recommended accessories for use with your tool are available at extra cost 

from your local service centre. 

Call 1800 654 155 (Aust) or 09 526 2556 (NZ).

CAUTION: 

The use of any non-recommended accessory may be 

hazardous.

GUARANTEE

Full One Year Warranty

D

E

WALT heavy duty industrial tools are warranted for one year from date of 

purchase. We will repair, without charge, any defects due to faulty materials or 

workmanship. Please return the complete unit, transportation prepaid, to any 

D

E

WALT Service Centre, or any authorised service station. 

This warranty does not apply to:
•     Accessories
•     Damage caused where repairs have been made or attempted by others
•      Damage due to misuse, neglect, wear and tear, alteration or 

modification.

Free One Year Service Contract

In addition to a full one year warranty, every D

E

WALT tool is backed with a 

Free One Year Service Contract. We will provide free labour on all repairs 

and preventative maintenance during the first year after purchase. Proof 

of purchase date is required.Contact your Service Centre on 1800 654 

155.(Aust) or 09 526 2556 (NZ).

30 Day No Risk Satisfaction Guarantee

I

f you are dissatisfied with any D

E

WALT power tool , for any reason, simply 

return it to the point of purchase with your sales receipt within 30 days for a 

replacement unit or full refund.

INFORMATION HOTLINE

When you need further information on a D

E

WALT product please phone:

AUSTRALIA: 

1800 816 900

NEW ZEALAND:  

09 579 7600

Unwanted Tools and the Environment

Take your old tool to an authorised D

E

WALT Service Centre where it will be 

disposed of in an environmentally safe way.

NOTES:

•     D

E

WALT reserves the right to change or upgrade product  specifications or 

standard equipment at any time without notice.

•     Standard equipment and accessories may vary by country.
•     Product specifications may vary by country.
•     Complete product range may not be available in all countries. 

See your local D

E

WALT dealer for range availability.

To assure product SAFETY and RELIABILITY, repairs, maintenance and adjust-

ment should be performed by authorized service centres or other qualified 

service personnel. Always use identical replacement parts.

FIG. 22

P

S

T

FIG. 26

R

V

FIG. 28

FIG. 23

Q

FIG. 24

R

R

FIG. 25

FIG. 27

U

Summary of Contents for DW734-XE










Reviews: