background image

• Tighten the screw.

• Switch the tool on.

Sawing in metal

• Mount an appropriate saw blade.

• Proceed as described above.

• Adapt the sawing speed.

• Set the sawdust blower to low position.

Use a cooling lubricant (cutting oil) to
prevent overheating of the saw blade or

the workpiece.

Sawing circles (fig. K)

• Install the trammel bar as shown.

Consult your dealer for further information on the

appropriate accessories.

Maintenance

Your D

E

WALT Power Tool has been designed to

operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation

depends upon proper tool care and regular cleaning.

Lubricating the guide roller (fig. L)

• Lubricate the guide roller (7) at regular intervals to

prevent jamming.

Cleaning

Keep the ventilation slots clear and regularly clean

the housing with a soft cloth.

Unwanted tools and the environment

Take your tool to an authorized D

E

WALT repair

agent where it will be disposed of in an

environmentally safe way.

GUARANTEE

• 30 DAY NO RISK SATISFACTION GUARANTEE •

If you are not completely satisfied with the
performance of your D

E

WALT tool, simply return

it within 30 days, complete as purchased, to the

point of purchase, for a full refund or exchange.

Proof of purchase must be produced.

• ONE YEAR FREE SERVICE CONTRACT •

If you need maintenance or service for your

D

E

WALT tool, in the 12 months following purchase,

it will be undertaken free of charge at an authorized

D

E

WALT repair agent. Proof of purchase must be

produced. Includes labour and spare parts for

Power Tools. Excludes accessories.

• ONE YEAR FULL WARRANTY •

If your D

E

WALT product becomes defective due

to faulty materials or workmanship within

12 months from the date of purchase, we

guarantee to replace all defective parts free of
charge or, at our discretion, replace the unit free

of charge provided that:

• The product has not been misused.

• Repairs have not been attempted by

unauthorized persons.

• Proof of purchase date is produced.

This guarantee is offered as an extra benefit

and is additional to consumers statutory rights.

For the location of your nearest authorized D

E

WALT

repair agent, please use the appropriate telephone

number on the back of this manual. Alternatively, a
list of authorized D

E

WALT repair agents and full

details on our after-sales service are available on

the Internet at 

www.2helpu.com

.

en - 7

22

E N G L I S H

Summary of Contents for DW322









Reviews: