DeWalt DW0330S, User Manual

Page: 8 / 13

8
E
7. Click to measure the distance and subtract it
from the previous measurement.
8.
View the difference between the two measurements
at the bottom of the display window (Figure
C 6
).
Changing the Unit of Measure
Once the current measurement is taken (the device is
not in Continuous Measure mode), you can set the unit
of measure to fractional ft (6'02"
9/16
), inches (74
9/16
in),
decimal ft (6.21 ft), decimal inches (3.21 in), or meters
(1.894 m).
1. Click .
2. Click ft/m .
3. Click the desired unit of measure.
• 0'00" 0/00
• 0" 0/00
• 0'00" ft
• 0.00 in
• 0.000 m
4. Click to return to the previous screen.
Using Your DW0330S With
You can use the Bluetooth
®
capability of your DW0330S
to pair it with the D
E
WALT
®
Tool Connect application
on your cell phone or tablet, and then record accurate
measurements in your floor plans.
1.
From either or , download
the D
E
WALT ® Tool Connect application to your cell
phone or tablet.
2.
Using the D
E
WALT
®
Tool Connect application,
capture the room or space for which you want to
record the measurements, and build your floor plan.
3. On the DW0330S keypad, click to turn on the
tool.
4. If the Bluetooth
®
icon does not appear on the display
window (Figure
C 2
), turn on Bluetooth
®
.
• Click - get to Bluetooth option.
• Click - select Bluetooth option.
5. Use the D
E
WALT
®
Tool Connect application to pair
your cell phone or tablet to the DW0330S.
6. Use the DW0330S to measure each wall in the room
or space captured in the floor plan, and sync the
measurements to the floor plan.
7.
Using the D
E
WALT ® Tool Connect application, save
the floor plan.
Once you have saved the floor plan, you can export it to
one of several different file formats, including PDF, DXF,
or JPG, and print it or email it to other people (your realtor,
home center, etc.).
“THE BLUETOOTH® WORD MARK AND LOGOS ARE REGIS-
TERED TRADEMARKS OWNED BY BLUETOOTH SIG, INC. AND
ANY USE OF SUCH MARKS BY DEWALT INDUSTRIAL TOOL CO.
IS UNDER LICENSE. OTHER TRADEMARKS AND TRADE NAMES
ARE THOSE OF THEIR RESPECTIVE OWNERS.”
Turning Off the Sound
Each time you take a measurement, the tool will beep.
You can turn off the beeps.
1.
On the touchscreen, click .
2.
Click to display .
3. Click to return to the previous screen.
Turning Off the Tool
The tool can be turned off in either of these ways:
• Press and hold for 10 seconds. When you release
after 10 seconds, the tool will turn off.
• If you do not use the tool for 90 seconds, it will
automatically turn off.