20
EngLIsh
Your
D
e
WALT
charger is double insulated in
accordance with EN60335; therefore no earth wire
is required.
If the supply cord is damaged, it must be replaced by a
specially prepared cord available through the
D
e
WALT
service organisation.
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in the plug.
• Connect the blue lead to the neutral terminal.
WARNING:
No connection is to be made to the
earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 3 A.
Using an Extension Cable
An extension cord should not be used unless absolutely
necessary. Use an approved extension cable suitable for
the power input of your charger (see
Technical Data
). The
minimum conductor size is 1 mm
2
; the maximum length
is 30 m.
When using a cable reel, always unwind the cable completely.
Important Safety Instructions for All Battery
Chargers
SAVE THESE INSTRUCTIONS:
This manual contains important
safety and operating instructions for compatible battery
chargers (refer to
Technical Data
).
• Before using charger, read all instructions and cautionary
markings on charger, battery pack, and product using
battery pack.
WARNING:
Shock hazard. Do not allow any liquid to get
inside charger. Electric shock may result.
WARNING:
We recommend the use of a residual current
device with a residual current rating of 30mA or less.
CAUTION:
Burn hazard. To reduce the risk of injury,
charge only
D
e
WALT
rechargeable batteries. Other types of
batteries may burst causing personal injury and damage.
CAUTION:
Children should be supervised to ensure that
they do not play with the appliance.
NOTICE:
Under certain conditions, with the charger
plugged into the power supply, the exposed charging
contacts inside the charger can be shorted by foreign
material. Foreign materials of a conductive nature such
as, but not limited to, steel wool, aluminum foil or any
buildup of metallic particles should be kept away from
charger cavities. Always unplug the charger from the
power supply when there is no battery pack in the cavity.
Unplug charger before attempting to clean
•
DO NOT attempt to charge the battery pack with any
chargers other than the ones in this manual.
The charger
and battery pack are specifically designed to work together.
•
These chargers are not intended for any uses other than
charging
D
e
WALT
rechargeable batteries.
Any other uses
may result in risk of fire, electric shock or electrocution.
•
Do not expose charger to rain or snow.
•
Pull by plug rather than cord when disconnecting
charger.
This will reduce risk of damage to electric plug
and cord.
•
Make sure that cord is located so that it will not be
stepped on, tripped over, or otherwise subjected to
damage or stress.
•
Do not use an extension cord unless it is absolutely
necessary.
Use of improper extension cord could result in risk
of fire,electric shock, or electrocution.
Batteries
Chargers/Charge Times (Minutes)
Cat #
V
DC
Ah
Weight (kg) DCB104
DCB107
DCB112
DCB113
DCB115
DCB118
DCB132
DCB119
DCB546
18/54
6.0/2.0
1.05
60
270
170
140
90
60
90
X
DCB547
18/54
9.0/3.0
1.46
75*
420
270
220
135*
75*
135*
X
DCB548
18/54
12.0/4.0
1.44
120
540
350
300
180
120
180
X
DCB181
18
1.5
0.35
22
70
45
35
22
22
22
45
DCB182
18
4.0
0.61
60/40**
185
120
100
60
60/40**
60
120
DCB183/B
18
2.0
0.40
30
90
60
50
30
30
30
60
DCB184/B
18
5.0
0.62
75/50**
240
150
120
75
75/50**
75
150
DCB185
18
1.3
0.35
22
60
40
30
22
22
22
X
DCB187
18
3.0
0.54
45
140
90
70
45
45
45
90
DCB189
18
4.0
0.54
60
185
120
100
60
60
60
120
DCB122
12
2.0
0.22
30
90
60
50
30
X
30
60
DCB124
12
3.0
0.25
45
140
90
70
45
45
45
90
DCB125
12
1.3
0.20
22
60
40
30
22
X
22
40
DCB127
12
2.0
0.20
30
90
60
50
30
X
30
60
*Date code 201811475B or later
**Date code 201536 or later
Batteries
Chargers/Charge Times (Minutes)
Cat #
DC
Weight
*Date code 201811475B or later
**Date code 201536 or later
