53
EnGLIsh
TROUBLESHOOTING GUIDE
BE sURE TO FOLLOW saFETY RULEs anD InsTRUcTIOns
For assistance with your product, visit our website at
www.dewalt.com
for a list of service centers.
PROBLEM
POssIBLE caUsE
sOLUTIOn
Unit will not start.
Battery pack not installed properly.
Check battery pack installation.
Battery pack not charged.
Check battery pack charging requirements.
Lock button not actuated.
Pull back on lock button/actuate trigger.
Pole connections not properly tightened.
Refer to
Joining Saw Head Module to Handle Module
.
Battery pack will not charge.
Battery pack not inserted into charger.
Insert battery pack into charger until LED illuminates.
Charger not plugged in.
Plug charger into a working outlet. Refer to
Charging a Battery
for
more details.
Surrounding air temperature too hot or
too cold.
Move battery pack to a surrounding air temperature of above 40 °F
(4.5 °C) or below 104 °F (+40 °C).
Bar/chain overheated.
Chain too tight.
Refer to
Adjusting Chain Tension
.
Lubrication needed.
Refer to
Chain Oiling
.
Chain is loose.
Chain tension set incorrectly.
Refer to
Adjusting Chain Tension
.
Poor cut quality.
Chain tension set incorrectly.
Refer to
Adjusting Chain Tension
.
NOTE:
Excessive tension leads to
excessive wear and reduction in life of bar & chain. Lubricate after every
10 minutes of use.
Chain needs replacement.
Refer to
Installing and Removing Saw Chain
.
Unit runs but does not cut.
Chain installed backwards.
Refer to
Installing and Removing Saw Chain
.
Summary of Contents for DCMPS567
