DeWalt DCMCS574, Original Instructions Manual

Page: 36 / 208

34
EnGLIsh
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
54V Chainsaw
DCMCS574, DCMCS575
D
e
WALT declares that these products described under “technical
data” are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended), EN62841-1:2015, EN62841-4-1:2020.
The Noise Emission in the Environment by Equipment for use
Outdoors Regulations 2001, S.I. 2001/1701 (as amended),
Schedule 8.
L
WA
(measured sound power level)
99 dB(A) (DCMCS574)/100 dB(A)DCMCS575,
EC‑Declaration of Conformity
Machinery Directive
o
54V Chainsaw
DCMCS574, DCMCS575
D
e
WALT declares that these products described under Technical
Data are in compliance with:
2006/42/EC, EN62841-1:2015, EN62841-4-1:2020.
2000/14/EC, Annex V
L
WA
(measured sound power level)
99 dB(A) (DCMCS574)/100 dB(A)DCMCS575,
Uncertainty (K)
1.8 dB(A) (DCMCS574)/2.0 dB(A)DCMCS575,
L
WA
(guaranteed sound power)
102 dB(A)
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
D
e
WALT at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
D
e
WALT .
Markus Rompel
Vice-President Engineering, PTE-Europe
D
e
WALT , Richard-Klinger-Straße 11,
65510, Idstein, Germany
15.10.2021
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
DCMCS574 DCMCS575
Voltage V
DC
54 54
Type 1 1
Battery type Li‑Ion Li‑Ion
Bar Length cm 45 50
Maximum Chain Speed (no‑load) m/s 15 15
Maximum Cutting Length cm 40 45
Oil Capacity ml 115 115
Weight (without battery pack) kg 5 5.7
Noise values and/or vibration values (triax vector sum) according to
EN60745‑2‑13:2009+A1:2010:
L
PA
(emission sound pressure level) dB(A) 83 83
L
WA
(sound power level) dB(A) 99 100
K (uncertainty for the given sound
level)
dB(A) 1,8 2
Vibration emission value a
h
= m/s 2 4.4 4.1
Uncertainty K = m/s 2 1.5 1.5
Congratulations!
You have chosen a D
e
WALT tool. Years of experience, thorough
product development and innovation make D
e
WALT one of the
most reliable partners for professional power tool users.
Technical Data
English (original instructions)
54V CHAINSAW
DCMCS574, DCMCS575