DeWalt DCM571, User Manual

Page: 8 / 20

6
English
• Only use the appliance in the upright position, with the
cutting line near the ground. Never switch the appliance
on in any other position.
• Move slowly when using the appliance. Be aware that
freshly cut grass is damp and slippery.
• Do not work on steep slopes. Work across the face of
slopes, not up and down.
• Never cross gravel paths or roads while the appliance is
running.
• Never touch the cutting line while the appliance is running.
• Do not put the appliance down until the cutting line has
come to a complete standstill.
• Use only the appropriate type of cutting line. Never use
metal cutting line or fishing line.
• Keep hands and feet away from the cutting line and blade
at all times, especially when switching on the motor.
• Before using the appliance and after any impact, check for
signs of wear or damage and repair as necessary.
• Take care against injury from any device fitted for
trimming the filament line length. After extending new
cutter line always return the machine to its normal
operating position before switching on.
• Close supervision is necessary when the appliance is used
near children.
• This appliance is not intended for use by young or infirm
persons without supervision.
• This appliance is not to be used as a toy.
• Use in a dry location only. Do not allow the appliance to
become wet.
• Do not immerse the appliance in water.
• Do not open the body casing. There are not user-
serviceable parts inside
• Do not operate the appliance in explosive atmospheres,
such as in the presence of flammable liquids, gases or dust.
• When the appliance is stored or transported in a vehicle
it should be placed in the boot or restrained to prevent
movement following sudden changes in speed or direction.
• When not in use, the appliance should be stored in a dry,
well ventilated place out of reach of children.
• Children should not have access to stored appliances.
Safety of Others
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
• Children must be supervised to ensure that they do not
play with the appliance.
b ) Avoid using the machine in bad weather conditions
especially when there is a risk of lightning.
c ) Use the machine only in daylight or good artificial light.
d ) Never operate the machine with damaged guards or
shields or without guards or shields in place.
e ) Switch on the motor only when the hands and feet are
away from the cutting means.
f )
Always disconnect the machine from the power
supply (i.e.
remove the plug from the mains, remove
the disabling device or removable battery)
ʵ whenever the machine is left unattended;
ʵ before clearing a blockage;
ʵ before checking, cleaning or working on the machine;
ʵ after striking a foreign object;
ʵ whenever the machine starts vibrating abnormally.
g ) Take care against injury to feet and hands from the
cutting means.
h ) Always ensure that the ventilation openings are kept
clear of debris.
i ) When using the brush cutter there is a risk of
kickback if it contacts a solid object (tree trunk,
branch, or rock).
The unit will kick to the opposite
direction of the brush cutter blade's rotation.
j ) Remove any objects that may cause kickback, such as
branches and rocks.
k ) Check for loose fasteners and damaged parts, such as
cracks in the cutting attachment.
Maintenance and storage
a ) Disconnect the machine from the power supply
(i.e.
remove the plug from the mains, remove the
disabling device or removable battery) before carrying
out maintenance or cleaning work.
b ) Use only the manufacturer’s recommended
replacement parts and accessories.
c )
Inspect and maintain the machine regularly.
Have
the machine repaired only by an authorized repairer.
d ) When not in use, store the machine out of the reach
of children.
e ) Use blade cover for metal blades during transport and
storage.
f ) Clean before storing, including the use of guards on
cutting attachments with metal blades.
ADDITIONAL SAFETY INSTRUCTIONS FOR
GRASS TRIMMERS / BRUSH CUTTERS
WARNING:
Cutting elements continue to rotate
after the motor is switched off.
• Wear long trousers to protect your legs.
• Before using the appliance, check that your cutting path is
free from sticks, stones, wire and any other obstacles.