background image

11

English

96

15

m/49

ft

Directive 2000/14/EC guaranteed sound 

power.

Date Code Position (Fig. U)

The date code 

 45 

 which also includes

 

the year of 

manufacture, is printed into the housing.
Example:

2016 XX XX

Year of Manufacture

Description (Fig. A)

 

WARNING: 

Never modify the power tool or any part of 

it. Damage or personal injury could result.

Variable speed trigger

Lock-off lever 

Lock-off tab

Handle

Speed control switch

Auxiliary handle

Motor housing

Trimmer pole

Strap mount

10 

Strap

11 

Guard

12 

Spool housing

13 

Battery housing

14 

Battery pack

15 

Battery release button

16 

Brush cutter blade

17 

Nut wrench

18 

Blade cover

Intended Use

Your

 

string trimmer / brush cutter has been 

designed for professional trimming applications.

DO NOT 

use under wet conditions or in the 

presence of flammable liquids or gases.

DO NOT

 let children come into contact with the tool. 

Supervision is required when inexperienced operators use 
this tool.
• 

Young children and the infirm.

 This appliance is not 

intended for use by young children or infirm persons 
without supervision.

•  This product is not intended for use by persons 

(including children) suffering from diminished 
physical, sensory or mental abilities; lack of experience, 
knowledge or skills unless they are supervised by a 
person responsible for their safety. Children should never 
be left alone with this product.

•  Take the time to thoroughly read and understand this 

manual prior to operation.

Markings on Tool

The following pictograms are shown on the tool:

Read instruction manual before use.

Wear ear protection.

Wear eye protection.

96

15

m/49

ft

Do not expose the tool to rain or high 

humidity or leave outdoors while it is 

raining.

96

15

m/49

ft

Switch the tool off. Before performing 

any maintenance on the tool, remove the 

battery from the tool.

Wear head protection.

Wear slip-resistant footwear.

Wear slip-resistant gloves.

96

15

m/49

ft

Keep people and animals at least 15 m 

away from the work area.

Do not use circular metal blades.

Beware of thrown objects.

Beware of blade thrust.

96

15

m/49

ft

Keep bystanders away.

Summary of Contents for DCM571





















Reviews: