DeWalt DCF896, Instructions Manual

Page: 41 / 172

39
EnGLIsh
condition. Inspect accessories prior to use to ensure that
they con tain no cracks.
Consult your dealer for further information on the
appropriate accessories.
Protecting the Environment
Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
household waste.
Products and batteries contain materials that can
be recovered or recycled reducing the demand for raw
materials. Please recycle electrical products and batteries
according to local provisions. Further information is available at
www.2helpU.com .
Rechargeable Battery Pack
This long life battery pack must be recharged when it fails
to produce sufficient power on jobs which were easily done
before. At the end of its technical life, discard it with due care for
our environment:
• Run the battery pack down completely, then remove it from
the tool.
• Li-Ion cells are recyclable. Take them to your dealer or a
local recycling station. The collected battery packs will be
recycled or disposed of properly.
Table 2
suggested Tapping speeds for aluminum/soft Materials
mm
Tap
Diameter
19
17
16
14
13
10
8
1 2 3 4 5 6 7 8 9 10
Impacting Speed
Table 1
Customizable Features Home
Factory Presets
Customizable Range Mode 1
Precision Wrench ™
Mode 2 Mode 3
Worklight brightness High High High High OFF–High
Worklight delay off 20 secs 20 secs 20 secs 20 secs 0–20 minutes
Maximum speed, forward (RPM) 0–2000 0–900 0–2000 0–2000 0–2000
Maximum speed, reverse (RPM) 0–2000 0–2000 0–2000 (impacting)
0–900 (removal)
0–2000 0–2000
Precision Wrench ™ hesitation (seconds) Disabled Disabled 0.5 Disabled 0–2
Impact time limit (seconds) Disabled Disabled Disabled Disabled 0.25–10
Precision Tap ™
Disabled Disabled Disabled Disabled
Off/Tapping/Advanced
(Refer to Table 4)