manualshive.com logo in svg

DeWalt DCD730-XE, Instruction Manual

Share
Download
DeWalt DCD730-XE Instruction Manual Download Page 15

13

CHARGER CLEANING INSTRUCTIONS

WARNING: 

Shock hazard. Disconnect the charger from the AC outlet before 

cleaning. Dirt and grease may be removed from the exterior of the charger using a 

cloth or soft non-metallic brush. Do not use water or any cleaning solutions.

Repairs

This charger and battery pack are not serviceable. Servicing at an authorized service 

centre is required to avoid damage to static sensitive internal components.
To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment 

(including brush inspection and replacement) should be performed by certified 

service centers or other qualified service organizations, always using identical 

replacement parts.

Accessories

WARNING: 

Since accessories, other than those offered by D

E

WALT, have not been 

tested with this product, use of such accessories with this tool could be hazardous. 

To reduce the risk of injury, only D

E

WALT recommended accessories should be used 

with this product. 
Recommended accessories for use with your tool are available at extra cost from 

your local service center. If you need any assistance in locating any accessory, please 

contact Stanley Black & Decker, 82 Taryn Drive, Epping, VIC 3076 Australia or call 

1800 338 002 or (NZ) 0800 339 258.

Summary of Contents for DCD730-XE

















Reviews:

No comments

Brands by name

Popular brands

Load more brands