English
8
WARNING:
Do not operate blower
without blow tube securely in place. Never reach down
into housing through tube hole.
WARNING:
Always wear safety
glasses. Wear a filter mask if the operation is dusty.
Use of rubber gloves and substantial footwear is
recommended when working outdoors. Keep long hair
and loose clothing away from openings and moving
parts. FOR HOUSEHOLD USE ONLY.
WARNING:
Cut Hazard. When turning
the tool off, wait 10 seconds for the fan to stop
rotating before removing the blower tube.
• Always ensure the blower is switched OFF and the
battery is removed when:
-
You leave blower unattended.
-
Clearing a blockage.
-
Checking, adjusting, cleaning or working on blower.
• Only use blower in daylight or good artificial light.
OPERATION
WARNING:
To reduce the risk of
serious personal injury, turn unit off and remove
the battery pack before making any adjustments
or removing/installing attachments or
accessories.
An accidental start-up can cause injury.
Blow Tube Assembly (Fig. D)
WARNING:
Do not operate blower
without tube securely in place. Never reach down into
housing through tube hole.
WARNING:
Always remove the battery
when you leave blower unattended or when storing,
checking, adjusting, cleaning, or working on blower.
1. To attach the blower tube
4
to the power head, align
the peg
8
of the power head with the notch
9
of the
blower tube opening as shown in Fig. D.
2. Push the blower tube onto the power head until the
tube locks engage the blower tube and an audible click
is heard.
3. Pull on the tube to ensure it is securely in place.
4. To remove the tube, insert a screwdriver into the
unlocking hole
10
on the side of the blower tube.
Depress the tab inside and pull tube off.
Fig. D
8
4
9
10
Concentrator Assembly (Fig. E)
Use the concentrator
7
attachment to target air flow to a
tighter area.
1. Align the concentrator
7
with the tube assembly as
shown in Fig. E.
Intended Use
This cordless handheld blower is designed for professional
blowing applications.
DO nOT
use under wet conditions or in presence of
flammable liquids or gases.
DO nOT
let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
ASSEMBLY AND ADJUSTMENTS
WARNING:
To reduce the risk of
serious personal injury, turn unit off and remove
the battery pack before making any adjustments
or removing/installing attachments or
accessories.
An accidental start-up can cause injury.
2. Slide the concentrator
7
onto the tube
4
.
3. Push down until the tabs
11
on both sides of the
tube engage the locking holes
12
in both sides of the
concentrator
7
.
4. Pull on the concentrator
7
to ensure it is securely in
place.
5. To remove the concentrator
7
, depress the tabs
11
and
pull the concentrator
7
away from the tube.
Fig. E
7
12
11
