24
English
CoDE
PossIBlE CAusE
PossIBlE solutIon
31
Water in pump oil
Drain oil and refill pump with D
e
WALT synthetic compressor oil.
32
Unloader valve in
open
position
Turn unloader valve knob clockwise until it stops.
33
Regulator open
Rotate the regulator knob counterclockwise to its built-in stop and push
knob in to lock in place.
34
Possible defective motor or starting capacitor
Contact a D
e
WALT factory service center or a D
e
WALT authorized service
center.
35
Paint spray on internal motor parts
Contact a D
e
WALT factory service center or a D
e
WALT authorized service
center. Do not operate the compressor in the paint spray area. See flam-
mable vapor warning.
36
Fuse blown, circuit breaker tripped
1. Check fuse box for blown fuse and replace as necessary. Reset circuit
breaker. Do not use a fuse or circuit breaker with higher rating than
that specified for your particular branch circuit.
2. Check for proper fuse. You should use a time delay fuse.
3. Check for low voltage conditions and/or proper extension cord.
4. Disconnect the other electrical appliances from circuit or operate the
compressor on its own branch circuit.
