ENGLISH
24
D51257 16 GAUGE STRAIGHT MAGAZINE FINISH NAILER
D51276 15 GAUGE ANGLED MAGAZINE FINISH NAILER
Congratulations!
You have chosen a D
E
WALT tool. Years of
experience, thorough product development and
innovation make D
E
WALT one of the most reliable
partners for professional power tool users.
Technical data
D51257 D51276
Type
1
1
Recommended operating
pressure
bar
4.6 – 8.4
4.6 – 8.4
Max. operating
pressure bar
8.4
8.4
Air consumption
l/m
1.27
1.70
per shot
at 6.9 bar
at 6.9 bar
Actuating mode
contact
contact
actuating actuating
Magazine angle
0˚
31° – 34°
Fasteners
length
mm
25.4 – 65
25.4 – 65
shank
diameter
mm
1.6
1.8
gauge
16
15
angle
0˚
31° – 34°
Loading capacity
no. of nails
100
100
Weight kg
1.77
1.75
L
PA
(sound
pressure) dB(A) 92
95
K
PA
(sound pressure
uncertainty) dB(A)
2.5 2.5
L
WA
(sound power) dB(A)
101 102
K
WA
(sound power
uncertainty) dB(A)
1.5 1.5
Weighted RMS
acceleration value
m/s²
2.5
1
3.1
1
Uncertainty K
m/s²
1.5
1.5
1
This value is a tool-related characteristic value
and does not represent the influence to the
hand-arm system when using the tool. The
influence to the hand-arm system when using
the tool will for example depend on the gripping
force, the contact pressure force, the working
direction, the adjustment of energy supply, the
workpiece and the work piece support.
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER:
Indicates an imminently
hazardous situation which, if not avoided,
will
result in
death or serious injury
.
WARNING:
Indicates a potentially
hazardous situation which, if not
avoided,
could
result in
death or
serious injury
.
CAUTION:
Indicates a potentially
hazardous situation which, if not
avoided,
may
result in
minor or
moderate injury
.
NOTICE:
Indicates a practice
not
related to personal injury
which, if
not avoided,
may
result in
property
damage
.
Denotes risk of fire.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
D51257, D51276
D
E
WALT declares that these products described
under “technical data” have been designed in
compliance with:
2006/42/EC, EN 792-13.
For more information, please contact D
E
WALT at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
D
E
WALT.
Horst Grossmann
Vice President Engineering and Product
Development