20
EngLIsh
WARNING:
The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of work patterns.
EC-Declaration of Conformity
Machinery Directive
Chopsaw
D28710
D
e
WALT
declares that these products described under
Technical Data
are in compliance with:
2006/42/EC, EN61029-1:2009 +A11:2010, EN61029-2-10:2010
+A11:2013.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
D
e
WALT
at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
D
e
WALT
.
Markus Rompel
Director Engineering
D
e
WALT
, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
26.03.2018
WARNING:
To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER:
Indicates an imminently hazardous
situation which, if not avoided,
will
result in
death or
serious injury
.
Congratulations!
You have chosen a
D
e
WALT
tool. Years of experience, thorough
product development and innovation make
D
e
WALT
one of the
most reliable partners for professional power tool users.
Technical Data
D28710
Voltage
V
AC
230
UK & Ireland
V
AC
115
Type
1
Power input
W
2200
No-load speed
min
-1
3800
Min. peripheral speed cutting disc
m/s
80
Disc diameter
mm
355
Disc bore
mm
25.4
Disc body thickness
mm
3.1
Type of cutting disc
straight, non-recessed
Cross-cutting capacity at 90°
circular
mm
130
square
mm
120 x 120
rectangular
mm
115 x 130
angular
mm
137 x 137
Cross-cutting capacity at 45°
circular
mm
115
square
mm
107 x 107
rectangular
mm
115 x 107
angular
mm
115 x 115
Weight
kg
17.0
Noise values and vibration values (triax vector sum) according to EN61029:
D28710
230V
D28710
115V
L
PA
(emission sound pressure level)
dB(A)
92.3
92.7
L
WA
(sound power level)
dB(A)
105.3
105.7
K (uncertainty for the given sound
level)
dB(A)
3.0
3.0
Vibration emission value a
h
=
m/s
2
3.3
1.8
Uncertainty K =
m/s
2
1.5
1.5
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN61029 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.
English (original instructions)
CHOPSAW
D28710
Summary of Contents for D28710
