24
EnGLIsh
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of work patterns.
Fuses:
Europe
230V tools
10 Amperes. mains
U.K. & Ireland
230V tools
13 Amperes. in plugs
EC-Declaration of Conformity
Machinery Directive
Angle Grinders
D28117, D28137
D
e
WALT
declares that these products described under
Technical Data
are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-3:2011
+A2:2013 +A11:2014.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
D
e
WALT
at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
D
e
WALT
.
Markus Rompel
Director Engineering
D
e
WALT
, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
02.05.2016
WARNING:
To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
DANGER:
Indicates an imminently hazardous
situation which, if not avoided,
will
result in
death or
serious injury
.
Congratulations!
You have chosen a
D
e
WALT
tool. Years of experience, thorough
product development and innovation make
D
e
WALT
one of the
most reliable partners for professional power tool users.
Technical Data
D28117
D28137
Voltage
V
AC
230
230
UK & Ireland
V
AC
230/115
–
Type
3
2
Power input
W
1100
1500
No-load speed
min
-1
2800–10500 2800–10500
Rated speed
min
-1
10500
10500
Wheel diameter
mm
115
125
Spindle diameter
M14
M14
Spindle length
mm
16
16
Weight
kg
2.5
2.7
Noise values and vibration values (triax vector sum) according to EN60745-2-3:
L
PA
(emission sound pressure level)
dB(A)
89
91
L
WA
(sound power level)
dB(A)
100
102
K (uncertainty for the given sound
level)
dB(A)
3
3
Surface grinding
Vibration emission value a
h,AG
=
m/s
2
5.5
9.0
Uncertainty K =
m/s
2
13.5
1.5
Disc sanding
Vibration emission value a
h,DS
=
m/s
2
3.5
4.5
Uncertainty K =
m/s
2
1.5
1.6
Polishing
Vibration emission value a
h,P
=
m/s
2
3.2
4.1
Uncertainty K =
m/s
2
1.5
1.5
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.
WARNING:
The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
English (original instructions)
ANGLE GRINDERS
D28117, D28137
Та
ше
в
-
Га
лв
ин
г
ОО
Д
www.tashev-galving.com
