DeWalt D27901, Original Instructions Manual

Page: 15 / 136

– 3
sucked up from a container it is recom-
mended to deactivate the "Filter
Dedusting" function.
–
If the maximum liquid level is reached
the appliance will turn off automatically.
–
In case of non-conductive liquids
(such as emulsion drilling fluids,
oils, and greases) the appliance is
not turned off when the container is
full. The filling level must be continu-
ously monitored and the container
must be emptied in time.
–
After the wet vacuuming: Clean the flat
folded filter with the filter cleaning.
Clean the electrodes with a brush.
Clean the container with a damp rag
and dry it.
Illustration
The suction hose is equipped with a clip
system. All C-35/C-DN-35 accessories can
be connected.
 Plug in the main plug.
 Switch on the appliance at the main
switch.

Danger
Risk of injury and damage! The socket out-
let is only for the connection of power tools
to the vacuum cleaner. Any other use of the
socket outlet is not permitted.
 Connect the mains plug of the electric
power tool to the vacuum cleaner.
 Switch on the appliance at the main switch.
Indicator lamp is on; vacuum cleaner is in
the standby mode.
Note: The vacuum cleaner is turned on and
off automatically with the electric power tool.
Note: The vacuum cleaner starts automat-
ically within 0.5 seconds and continues to
run for 15 seconds after the power tool has
being switched off.
Note: Please refer to "Technical specifica-
tions" for the power connection specifica-
tions of the power tools.
Illustration

Adjust the stepped power tool adaptor
to fit the connection of the electric pow-
er tool.
Illustration
 Remove the elbow from the suction hose.
 Attach the stepped power tool adaptor
to the suction hose.
Illustration
 Connect the adaptor to the electric pow-
er tool.
Note: A filter dedusting every 5 to 10 min-
utes will increase the life of the flat folded
filter.
–
Switch off filter dedusting:
 Push the slide upward.
–
Switch on filter dedusting:

Push the slide downward.
Illustration
 Press and hold the switch on the handle
for several seconds while the filter
cleaning is turned on. The flat folded fil-
ter is automatically cleaned through an
air jet (pulsating sound).
 Filter dedusting: Repeatedly press the
button on the handle while the filter
cleaning is turned on.
 Switch off the appliance at the main
switch.
 Pull out the mains plug.
 Empty the container.

Vacuum and wipe the appliance inside
and outside with a damp cloth.
 Wind the mains cable around the cable
holder.
 Place the appliance in a dry room and
secure it from unauthorized use.
Clip connection
Operation
Turning on the Appliance
Working with electrical power tools
Filter dedusting
Turn off the appliance
After each operation
Storing the Appliance
15 EN