5
• arsenic and chromium from chemically-treated lumber (CCA).
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
•
Avoid prolonged contact with dust from power sanding, sawing, grinding,
drilling, and other construction activities. Wear protective clothing and wash
exposed areas with soap and water.
Allowing dust to get into your mouth, eyes,
or lay on the skin may promote absorption of harmful chemicals.
WARNING:
Use of this tool can generate and/or disburse dust, which may cause
serious and permanent respiratory or other injury. Always use NIOSH/OSHA approved
respiratory protection appropriate for the dust exposure. Direct particles away from
face and body.
WARNING: ALWAYS wear proper personal hearing protection that conforms to
ANSI S12.6 (S3.19) during use.
Under some conditions and duration of use, noise
from this product may contribute to hearing loss.
WARNING: Always use eye protection.
All users and bystanders must wear eye
protection that conforms to ANSI Z87.1.
• The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
V .................... volts
A ...............amperes
Hz .................. hertz
W ..............watts
min ................ minutes
...........alternating current
........... direct current
...........alternating or direct current
................. Class I Construction
no ..............no load speed
......................
(grounded)
.............earthing terminal
................. Class II Construction
.............safety alert symbol
......................
(double insulated)
BPM ..........beats per minute
…/min ........... per minute
RPM ..........revolutions per minute
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
Specifications
D26411-XE D26414-XE
Voltage
220-240 V
220-240 V
Power Input
1800 W
2000 W
Air temperature range (at nozzle)
Low air flow
50-400º C
50-400º C
(122–752º F)
(122–752º F)
High air flow
50-600º C
50-600º C
(122–1112º F)
(122–1112º F)
Weight
0.65 kg (1.4 lbs)
0.71 kg (1.6 lbs.)
DESCRIPTION (Fig. 1)
WARNING:
Never modify the tool or any part of it. Damage or personal injury
could result.
We recommend the use of a residual current device with a residual current rating of
30mA or less.
INTENDED USE
Your D
E
WALT heat gun D26411-XE/D26414-XE has been designed for stripping paint,
soldering pipes, shrinking PVC, welding and bending plastics as well as general drying
and thawing purposes.
DO NOT
use under wet conditions or in presence of flammable liquids or gases.
This heat gun is a professional power tool.
DO NOT
let children come into contact
with the tool. Supervision is required when inexperienced operators use this tool.
A. On/off switch
E. Nozzle
B. Air vents
F. Tool hanging ring
C. Kick-off stand
G. Heat barrel cover
D. Air temperature adjustment knob H. LCD air temperature indicator (D26414-XE)
Summary of Contents for D26411-XE
Page 1: ...D26411 XE D26414 XE HEAT GUN INSTRUCTION MANUAL ...
Page 2: ......
