19
english
Protecting the Environment
Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your
D
e
WALT
product
needs replacement, or if it is of no further use to
you, do not dispose of it with household waste.
Make this product available for separate collection.
Separate collection of used products and
packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
D
e
WALT
provides a facility for the collection and
recycling of
D
e
WALT
products once they have
reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
D
e
WALT
office at the address indicated in this
manual. Alternatively, a list of authorised
D
e
WALT
repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.com
.
1. Push the snap-fit (s) at the back of the
extraction head, and pull it out of the head
holder.
2. Use a screwdriver to remove the dust brush (i)
out of the extraction head.
3. Replace the dust brush with a new one.
4. Make sure that the open end of the dust brush
is positioned to the centering pocket at the
extraction head.
5. Push the extraction head back into the head
holder. The centering pin will stick into the open
end of the dust brush and secure it in place.
Cleaning
WARNING:
Blow dirt and dust out of
the main housing with dry air as often as
dirt is seen collecting in and around the
air vents. Wear approved eye protection
and approved dust mask when
performing this procedure.
WARNING:
Never use solvents or
other harsh chemicals for cleaning the
non-metallic parts of the tool. These
chemicals may weaken the materials
used in these parts. Use a cloth
dampened only with water and mild
soap. Never let any liquid get inside the
tool; never immerse any part of the tool
into a liquid.
Cleaning the Dust Collector
WARNING:
Do not use a brush to
clean the dust collector or filter.
During intensive use the dust collector becomes
clogged with dust. Refer to
Emptying the Dust
Collector
under
Operation
.
Optional Accessories
WARNING:
Since accessories, other
than those offered by
D
e
WALT
, have
not been tested with this product, use
of such accessories with this tool could
be hazardous. To reduce the risk of
injury, only
D
e
WALT
, recommended
accessories should be used with
this product.
Consult your dealer for further information on the
appropriate accessories.
