background image

© 2008 Devon IT, Inc. All Rights Reserved

Visit us on the web:

http://www.devonit.com

Setup

1. Connect your monitor to the appropriate DVI port on the back of the unit.

(

Caution:

The monitor must be connected to the appropriate DVI port

as specified on page 3 of XPe and page 5 of DeTOS).

2. Connect the mouse and keyboard to the USB ports.

3. Connect the network cable to the LAN Port on the unit and the other end of

the cable to your local network.

4. Connect the power supply to the TC5’s power supply port on the back of the

unit.

5. Plug the power cord into a surge-protected AC Outlet.

6. Power on the monitor before turning on the TC5.

7. Power on the TC5 by pressing the power button on the front of the device.

Warnings

• Make sure the monitor is plugged into the appropriate DVI port and turned

on, before powering unit on. Failure to do so may make the unit appear as if
it is not functioning properly.

• For proper ventilation, the thin client must be placed in an open area in it

vertical position. Improper mounting can use the unit to overheat and
become damaged.

• Do not shut the thin client down by removing the power cord. The sudden

loss of power can damage the unit.

• It is important to not interrupt the power to the thin client while doing a

firmware upgrade. Loss of power can result in a damaged operating system.

• Do not place anything on or over the terminal.

• Excessive sound pressure from earphones and headphones can cause hearing

loss. Adjustment of the volume to “Maximum” increases the earphones' and
headphones' output voltage and therefore the sound pressure.

Caution

: Risk of explosion if battery is replaced by an incorrect type. Dispose of

used batteries according to the instructions.

• Power Adapter ADP-36CH B 12V 3A output.

• Best Management Practices for Perchlorate Materials: The battery contains

perchlorate substances. Do not throw it in the water or in the normal
garbage. You cannot burn them as a way to dispose of them. Contact your
local household hazardous waste. “Perchlorate Material-special handling may
apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.

• Product documentation and additional warnings are available from Devon

IT’s web site at www.devonit.com.

Devon IT TC5 Terminal

Quick Start Guide

version1

2.

ENGLISH_DIT_TC5_QSG:Layout 1  1/13/09  4:46 PM  Page 3

Summary of Contents for TC5D









Reviews: