Elektrical installation 22
devolo Magic 2 LAN DINrail
a
liquid has been spilled on the device or
objects have fallen into the device.
a
the device has been exposed to rain or
water.
a
the device does not work, even though the
operating instructions have been followed
properly.
a
the device’s case is damaged.
3.4 Installation
1
Install the devolo Magic 2 LAN DINrail properly
on the top-hat rail.
Take into account the vertical installation
alignment of the device, so that the mains
power supply comes from above.
2
Now connect the conductors according to the
line connections.
When connecting to the sockets, make sure
the conductor cross-section is 0.18 mm² to 6
mm².
DANGER!
Risk of fire caused by incorrect
conductor cross-section and improper in-
stallation of the power supply
Comply with the specified conductor cross-
sections and ensure the power supply is
correctly installed
a
Single-phase connection
: Neutral conduc-
tors and external conductors are connected
to terminals
N
and
L1
(see Fig. 3).
a
Three-phase connection
: Neutral conduc-
tors and three external conductors are
connected to terminals
N,
L1, L2
and
L3
.
The device is
supplied with power
via ter-
minals
N
and
L1
(see Fig. 4).
a
PE connection
: The earth wire must be
connected to the PE terminal.
