Devolo dLAN TV Sat, User Manual

Page: 19 / 72

|
Initial use
19
|
devolo dLAN TV Sat
|
3.4 Connecting the remote control
Using the infrared remote control provided, you can operate all important func-
tions of the
Cyberlink TV Enhance program even if not sitting directly in front
of the computer.
Thus the installation requires just two easy steps:
���
Insert the two AAA batteries into the remote control in the correct position
(see illustration in the battery compartment).
���
Plug the separate infrared receiver into an available USB port of your com-
puter. No additional driver installation is necessary. Adjust the receiver so
that it is within optical signal range of the remote control.
How to tell when you have done it correctly
쎲
If the infrared receiver has been plugged into an available USB port of the
computer and receives key signals from the remote control, a red LED on the
front side of the receiver housing is illuminated.
쎲
When CyberLink TV Enhance is started on the computer, the application
can be controlled successfully using the remote control.
Note that the remote control and receiver communicate using an infrared con-
nection. Therefore, always position the receiver such that it is not being blocked
or covered by any objects and can be seen from all desired positions in the room.
When pressing keys on the remote control, always point it towards the receiver.
3.5 Software installation
The product CD includes various software components for operating the
adapter:
쎲
The devolo dLAN TV Sat software includes drivers and rules for supporting
the adapter in the Windows operating system.
쎲
Using the devolo dLAN Configuration Wizard , you can use your own net-
work key in your dLAN network.
쎲
The devolo Informer finds dLAN adapters in a dLAN network and displays
information on the devices found.