Devolo dlan pro 1200+ wifi ac, Manual

Page: 25 / 81

24 Initial use
devolo dLAN pro 1200+ WiFi ac
쎲
In order to switch Wi-Fi back on , tap the Wi-Fi
button .
Connecting Wi-Fi devices via WPS
쎲
If the device is still on factory defaults , tap the
Wi-Fi button in order to activate WPS .
쎲
If the
Wi-Fi
connection was
switched off
and
you would like to activate WPS , press the Wi-
Fi button twice ; once to switch Wi-Fi on, and
again to activate WPS.
WPS is one of the encryption standards devel-
oped by the Wi-Fi Alliance. The objective of
WPS is to make it easier to add devices to an
existing network. For more detailed informa-
tion, refer to Chapter
4.5.5 Wi-Fi Protected
Setup (WPS)
.
Indicator light
The integrated indicator light ( LED ) shows the Wi-Fi
status for the dLAN pro 1200+ WiFi ac by illuminating
and/or flashing:
쎲
When the Wi-Fi connection is switched off , the
LED is also off .
쎲
When a Wi-Fi connection is switched on, the LED
lights up white .
쎲
White flashing and illumination behaviour
쑗
The LED lights up when there is a connection
to the Wi-Fi network.
쑗
The LED flashes until the WPS pairing is
completed .
3.3.3 Ethernet ports
The two network jacks can be used to connect comput-
ers or other network devices to the
dLAN pro 1200+ WiFi ac via commercially available
network cables.
3.3.4 Reset
The Reset button (on the side of the housing) has two
different functions:
쎲
The device restarts if you press the Reset button
for less than 10 seconds .
쎲
To change the configuration of the
dLAN pro 1200+ WiFi ac back to the
factory
defaults , press the Reset button for more than
10 seconds . Keep in mind that all settings that
have already been configured will be lost!
You can use a pointed object (such as a paper
clip) to press the reset button.