Devolo dLAN pro 1200+ PoE, Manual

Page: 21 / 33

20 Initial use
devolo dLAN pro 1200+ PoE
You can use a pointed object (such as a paper
clip) to press the reset button.
3.3.4 Ethernet connection
A PC or other network device can be connected to the
dLAN pro 1200+ PoE at this port using a standard net-
work cable.
The Ethernet port can provide power to a connected
device in accordance with IEEE 802.3af class '0'.
3.3.5 Integrated electrical socket
If you connect additional devices using a power strip,
plug this power strip into the electrical socket of the
dLAN pro 1200+ PoE. The integrated mains filter elim-
inates any interference from connected devices and
significantly improves data transmission in the net-
work.
3.3.6 PowerSave mode
A dLAN pro device switches to PowerSave mode after
a short while if no active network device is connected
to the network interface (such as if the network card on
a computer is inactive).
In PowerSave mode, the
dLAN pro device cannot be accessed over the
electrical wiring
. As soon as the network device (e.g.
computer) connected to the network interface is
switched on again, your dLAN pro device can also be
accessed over the electrical wiring again.
A dLAN pro device connected to a
computer can go into PowerSave
mode only if the network card of the
switched-off computer is also inac-
tive.
If you are using a network card that
remains active when the computer is
switched off, we recommend con-
necting the computer to an on/off
switch using a power strip so that
both the computer and the integrat-
ed network card are de-energised.
If you would like to ensure that a dLAN pro device does
not
switch to
PowerSave mode
, this function can be
disabled in the dLAN AVpro manager software.
More information on devolo Green IT and
sustainability is available online at
www.devolo.com
.