Devolo 08786, Manual

Page: 16 / 56

Introduction 16
devolo Magic 2 WiFi next
2.2.1PLC button
Starting up a new devolo Magic PLC network
devolo Magic adapters that are in the factory de-
fault condition, i.e. have been recently purchased
or successfully reset (see Chapter
3.5 Removing
the devolo Magic adapter from a PLC network ),
automatically start to attempt to pair (establish a
PLC connection) with another devolo Magic adap-
ter when reconnected to the mains supply.
After plugging the devolo Magic adapters into
available power sockets, a new devolo Magic net-
work is established automatically within 3 minutes.
You can find detailed information about in-
stalling devolo Magic adapters in Chapter
3.3.1 Automatic setup for a new
devolo Magic PLC network
.
Expanding an existing devolo Magic PLC net-
work by adding another devolo Magic adapter
In order to use a new devolo Magic 2 WiFi next in
your devolo Magic network, first you have to
connect it to your existing devolo Magic adapters
devices as a network. This is accomplished by using
a shared PLC password.
You can find detailed information about in-
stalling devolo Magic adapters in Chapter
3.3.2 Expanding an existing PLC network
by adding another
devolo Magic 2 WiFi next
.