6
Setting the Date and Time
1.
Hold the "OK" (12) and "Set" (13) buttons simultaneously for 5 seconds until the day of
the week display (18) flashes.
2.
Use the up button (10) and down button (11) to select the current day of the week and
confirm by pressing the "Set" button (13). The weekday indicator (18) stops flashing.
3.
The hour display (17) will start flashing, use the up (10) and down buttons (11) to select
the hour. Press the "Set" button (13) to store the hour.
4.
The minute display (16) will start flashing, use the up (10) and down buttons (11) to select
the minutes. Press the "Set" button (13) to store the minutes.
The time and date will now be stored in the heater for future use.
Setting the Temperature
•
The unit of measure for the target temperature is
℃
in both Auto and Manual mode.
•
When the heater is switched on, you can select the target temperature using the up (10)
and down keys (11).
•
If no action is taken for 10 seconds after the setting is completed, the system
automatically saves the setting and exits the menu.
Setting the Timer
Setting the Timer in Manual Mode (24-hour timer)
1.
Press the Auto/Manual mode button (19) to select the manual mode. The display shows
"M" in manual mode (7).
2.
Press the "Set" button (13) to set the hour of the timer to cease heating. Press the up (10)
and down (11) buttons to select the hour (if the selected hour is prior to the current hour,
the system automatically rolls over to the following day).
3.
Press the "Set" button (13) to set the minute that the timer should cease heating (if the
set hour is identical to the current hour but the selected minute is less than the current
minute, the system automatically rolls over to the following day).
4.
Press the "OK" button (12) to save and exit the timer setting.
Setting the Timer in Auto Mode (Weekly Timer)
Please note: You can set four heating segments per day. This means that you can schedule up to
four startup times and four shutdown times per day. Timers can only be set in one-hour
increments.
1.
Press the mode selection button ((M/A) (19)) to select Auto mode. The display shows "A"
When the unit is in Auto mode (8).
2.
Press the "Set" button (13) the day of the week display (18) flashes.
3.
Use the up button (10) and down button (11) to select the day of the week that you would
like to set the timer for.
4.
Press the "Set" button (13) again to set the startup hour of the first timer of the day. You
will know that this is heating segment 1 because a 1 will be displayed on the temperature
indicator display (15).
5.
Press the "Set" button (13) again and use the up (10) and down (11) buttons to select the
hour that the heater will cease heating in heating segment one. If the start time matches
