7
3 Color Digital Display
Front shell
– refrigeration pipe or components are installed in a position where they are unlikely to be
exposed to any substance which may corrode refrigerant containing components, unless the
components are constructed of materials which are inherently resistant to being corroded or are
suitably protected against being so corroded.
2.2.9 Checks to electrical devices
Repair and maintenance to electrical components should include initial safety checks and
component inspection procedures. If a fault exists that could compromise safety, then no
electrical supply should be connected to the circuit until it is satisfactorily dealt with. If the fault
cannot be corrected immediately but it is necessary to continue operation, an adequate
temporary solution should be used. This should be reported to the owner of the equipment, so
all parties are advised.
Initial safety checks should include:
-those capacitors are discharged: this should be done in a safe manner to avoid possibility of
sparking.
-that there no live electrical components and wiring are exposed while charging, recovering, or
purging the system.
-that there is continuity of earth bonding
3. PRODUCT OVERVIEW
Air Outlet
Castors
Control Panel