DS2400T DVB-T2 Signal Analysis Meter Operation Manual
17
3.
Press
or
into Parameter setting, you
can define the channel plan as Analogue channel
plan, digital channel plan or analog/digital mixed
channel plan. Also you can edit “Bandwidth,
Modulation type, Symbol Rate” in digital channel
plan. When your setup is completed, please press
or
to START, then press
to
creat your user channel plan. For a while, new
user plan will be saved automatically.
NOTE:
The analog channels with level higher than
45dBμV
and digital channel with power level higher
than 32dBμV will be enabled in
standard channel plan.
Only the enabled channels will be displayed in each
measurement interface. After setup your user channel
plan, you can also enable or disable channels.
When
the learning the channel plan, please keep the
power on and don’t interrupt the process, otherwise it
will create a wrong channel plan.